-
Digital controller for temperature and humidity intended for low and medium relative humidity applications (10% to 85% with no condensation). It has three outputs: one for temperature control, another for… -
A controller for temperature and humidity with three outputs: one for temperature control (2A Triac), one for humidity control, and a third auxiliary output that can operate as a second… -
Digital controller applied for cooling and/or heating, they feature an internal audible alarm (buzzer), configurable digital filter and accept 3 types of sensors: NTC thermistor (-50 to 105°C / -58… -
Digital controllers applied for cooling and/or heating, they feature an internal audible alarm (buzzer), configurable digital filter and accept 2 types of sensors: NTC thermistor (-50 to 105°C / -58… -
Digital controller for temperature designed for heating (cooking equipment), it uses a type J thermocouple* as a sensor for the temperature range from -50° C to 600° C (32° to… -
A multifunctional monitor and controller that joins together, in a single compact product, cutting edge features to measure electric power, thermal monitoring, and refrigeration systems protection. With two independent three-phase… -
Digital pressure switch easy-to-install and easy-to-apply for systems that require effective pressurization or depressurization control up to 850 psi. It is able to control loads up to 1 HP directly… -
Pressure switch and thermostat with two control outputs and two stages, operating in pressurization, depressurization, refrigeration, heating, or alarm modes. It can also be used for water level control. It… -
Pressure gauge dedicated for condensing units with characteristics that contribute to the power efficiency of the refrigeration system. It has two analog outputs that allow the precise control of the… -
Pressure based controller designed for refrigeration plants that require suction and discharge pressure control. Featuring 7 outputs of control, 6 digital and 1 analog for variable speed control, in addition… -
Full Gauge Controls transducers are made in 316L inox steel and have high stability and precision, being immune to interferences and vibrations. Check out the differences in each model: MODEL… -
Full Gauge Controls transducers are made in 316L inox steel and have high stability and precision, being immune to interferences and vibrations. Check out the differences in each model: MODEL… -
Electronic controller for compression racks and chillers. It performs the pressure and saturation temperature control and monitoring of the refrigerating fluid or the temperature of a secondary flow (glycol, cold… -
Digital temperature controller for cooling or heating purposes combined with a time scheduler which allows the user to configure up to eight daily events, with programmable start and end time,… -
Temperature sensor covered with a stainless steel shell. It operates in temperatures from -50 to 105°C / -58 to 221°F. Line Sensors Applications Temperature sensor -
NTC sensor with thermoplastic polyester cable and individual isolation. Operates in temperatures from -50°C to 105°C/-58ºF to 221°F. Line Sensors Applications Temperature sensor
